ACS712ELCTR-05B-T Fully Integrated , Hall Effect Based Linear Current Sensor
integrated circuit ic
,integrated circuit components
ACS712
Fully Integrated, Hall Effect-Based Linear Current Sensor with 2.1 kVRMS Voltage Isolation and a Low-Resistance Current Conductor
Features and Benefits
▪ Low-noise analog signal path
▪ Device bandwidth is set via the new FILTER pin
▪ 5 µs output rise time in response to step input current
▪ 50 kHz bandwidth
▪ Total output error 1.5% at TA= 25°C, and 4% at –40°C to 85°C
▪ Small footprint, low-profile SOIC8 package
▪ 1.2 mΩ internal conductor resistance
▪ 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8
▪ 5.0 V, single supply operation
▪ 66 to 185 mV/A output sensitivity
▪ Output voltage proportional to AC or DC currents
▪ Factory-trimmed for accuracy
▪ Extremely stable output offset voltage
▪ Nearly zero magnetic hysteresis
▪ Ratiometric output from supply voltage
Package: 8 pin SOIC (suffix LC)
Description
The Allegro® ACS712 provides economical and precise solutions for AC or DC current sensing in industrial, automotive, commercial, and communications systems. The device package allows for easy implementation by the customer. Typical applications include motor control, load detection and management, switched-mode power supplies, and overcurrent fault protection.
The device consists of a precise, low-offset, linear Hall sensor circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field which is sensed by the integrated Hall IC and converted into a proportional voltage. Device accuracy is optimized through the close proximity of the magnetic signal to the Hall transducer. A precise, proportional voltage is provided by the low-offset, chopper-stabilized BiCMOS Hall IC, which is programmed for accuracy after packaging.
The output of the device has a positive slope (>VIOUT(Q)) when an increasing current flows through the primary copper conduction path (from pins 1 and 2, to pins 3 and 4), which is the path used for current sensing. The internal resistance of this conductive path is 1.2 mΩ typical, providing low power loss. The thickness of the copper conductor allows survival of the device at up to 5× overcurrent conditions. The terminals of the conductive path are electrically isolated from the sensor leads (pins 5 through 8). This allows the ACS712 current sensor to be used in applications requiring electrical isolation without the use of opto-isolators or other costly isolation techniques.
The ACS712 is provided in a small, surface mount SOIC8 package. The leadframe is plated with 100% matte tin, which is compatible with standard lead (Pb) free printed circuit board assembly processes. Internally, the device is Pb-free, except for flip-chip high-temperature Pb‑based solder balls, currently exempt from RoHS. The device is fully calibrated prior to shipment from the factory.
Absolute Maximum Ratings
| Characteristic | Symbol | Notes | Rating | Units |
|---|---|---|---|---|
| Supply Voltage | VCC | 8 | V | |
| Reverse Supply Voltage | VRCC | –0.1 | V | |
| Output Voltage | VIOUT | 8 | V | |
| Reverse Output Voltage | VRIOUT | –0.1 | V | |
| Output Current Source | IIOUT(Source) | 3 | mA | |
| Output Current Sink | IIOUT(Sink) | 10 | mA | |
| Overcurrent Transient Tolerance | IP | 100 total pulses, 250 ms duration each, applied at a rate of 1 pulse every 100 seconds. | 60 | A |
| Maximum Transient Sensed Current | IR(max) | Junction Temperature, TJ < TJ(max) | 60 | A |
| Nominal Operating Ambient Temperature | TA | Range E | –40 to 85 | ºC |
| Maximum Junction | TJ(max) | 165 | ºC | |
| Storage Temperature | Tstg | –65 to 170 | ºC |
Stock Offer (Hot Sell)
| Part no. | Quantity | Brand | D/C | Package |
| P89LPC936FDH | 5512 | 14+ | TSSOP | |
| LT1010CT | 5605 | LT | 14+ | TO220 |
| IT8705F-FXS | 5698 | ITE | 14+ | QFP |
| ADS1232IPWR | 5504 | TI | 16+ | TSSOP |
| LMZ10503TZE-ADJ/NOPB | 5310 | TI | 16+ | PFM-7 |
| XCR3032XL-10VQG44C | 5116 | XILINX | 13+ | QFP44 |
| LT1461BIS8-2.5 | 4922 | LT | 15+ | SOP8 |
| FGA25N120ANTD | 4728 | FSC | 16+ | TO-3P |
| IKCS17F60F2C | 434 | 16+ | MODULE | |
| D2030A | 4340 | HUANJIN | 14+ | TO-220-5 |
| 2SK2611 | 4146 | TOSHIBA | 14+ | TO-3P |
| S8025L | 3952 | TOCCOR | 14+ | TO-220 |
| AD623ARZ | 3758 | AD | 16+ | SOP |
| TDA5140AT/C1 | 3564 | PHILPS | 16+ | SOP20 |
| OPA2344UA | 3370 | TI | 13+ | SOP-8 |
| AP89341 | 3176 | APLUS | 15+ | DIP |
| 2N6057 | 2982 | MOT | 16+ | TO-3 |
| ATMEGA8A-AU | 2788 | ATMEL | 16+ | QFP |
| IRFP460PBF | 2594 | IR | 14+ | TO-247 |
| L297 | 2400 | ST | 14+ | DIP |
| MAX1324ECM | 2206 | MAXIM | 14+ | QFP |
| UCC2897APWR | 2012 | TI | 16+ | TSSOP20 |
| W5300 | 1818 | WIZNET | 16+ | QFP |
| STRW6252 | 1624 | SANKEN | 13+ | TO-220F |
| SI9241A | 1430 | VISHAY | 15+ | SOP8 |
| TC4-1W | 1236 | MINI | 16+ | NA |
| LTC4357CMS8 | 1042 | LT | 16+ | MSOP8 |
| MSP430F149IPMR | 848 | TI | 14+ | QFP |
| PE-65351 | 654 | PULSE | 14+ | DIP6 |
| SIM900 | 760 | SIM | 14+ | NA |
0402 0.063W 10kOhm SMT Thick Film Chip Resistor RC0402JR-0710KL
200MHz MPZ1608S300ATAH0 Chip Beads 5A For Power Line TDK SMD0603
22R 5% SMD0402 Film Chip Resistors ERJ-2GEJ220X PANASONIC
MOV-20D751K 750V 6.5kA Varistor blue SMD Chip Resistor 1 Circuit Through Hole Disc 20mm
2SB1261-TP 10W General Purpose Rectifier Diode Silicon Epitaxial Planar Pnp Transistor
IXFK140N30P Polar Power Mosfet Hiperfet TO264 300V 140A
DF2B29FU,H3F TVS 24VWM 47V ESD Protection Diodes
PMEG6010ER 1A Low VF MEGA Schottky Barrier Rectifier SOD123
SK34SMA 3A SMD Schottky Barrier Rectifier Diodes DO - 214AC
SMBJ5.0A Silicon Avalanche Diodes 600W Surface Mount TVS Diodes
| Image | Part # | Description | |
|---|---|---|---|
|
|
0402 0.063W 10kOhm SMT Thick Film Chip Resistor RC0402JR-0710KL |
10 kOhms ±5% 0.063W, 1/16W Chip Resistor 0402 (1005 Metric) Moisture Resistant Thick Film
|
|
|
|
200MHz MPZ1608S300ATAH0 Chip Beads 5A For Power Line TDK SMD0603 |
30 Ohms 1 Power Line Ferrite Bead 0603 (1608 Metric) 5A 10mOhm
|
|
|
|
22R 5% SMD0402 Film Chip Resistors ERJ-2GEJ220X PANASONIC |
22 Ohms ±5% 0.1W, 1/10W Chip Resistor 0402 (1005 Metric) Automotive AEC-Q200 Thick Film
|
|
|
|
MOV-20D751K 750V 6.5kA Varistor blue SMD Chip Resistor 1 Circuit Through Hole Disc 20mm |
750 V 6.5 kA Varistor 1 Circuit Through Hole Disc 20mm
|
|
|
|
2SB1261-TP 10W General Purpose Rectifier Diode Silicon Epitaxial Planar Pnp Transistor |
Bipolar (BJT) Transistor PNP 60 V 3 A 50MHz 1 W Surface Mount D-Pak
|
|
|
|
IXFK140N30P Polar Power Mosfet Hiperfet TO264 300V 140A |
N-Channel 300 V 140A (Tc) 1040W (Tc) Through Hole TO-264AA (IXFK)
|
|
|
|
DF2B29FU,H3F TVS 24VWM 47V ESD Protection Diodes |
47V Clamp 3A (8/20µs) Ipp Tvs Diode Surface Mount USC
|
|
|
|
PMEG6010ER 1A Low VF MEGA Schottky Barrier Rectifier SOD123 |
Diode 60 V 1A Surface Mount SOD-123W
|
|
|
|
SK34SMA 3A SMD Schottky Barrier Rectifier Diodes DO - 214AC |
Diode 40 V 3A Surface Mount DO-214AC, SMA
|
|
|
|
SMBJ5.0A Silicon Avalanche Diodes 600W Surface Mount TVS Diodes |
9.2V Clamp 65.3A Ipp Tvs Diode Surface Mount DO-214AA (SMBJ)
|